It is expected that the total demand for caprolact

2022-08-21
  • Detail

It is expected that the total demand for caprolactam in China will increase significantly in the next few years.

caprolactam molecular formula: c6h11no, molecular weight: 133.16, white powder or crystal, oily hand feel, water absorption, easily soluble in water and organic solvents such as ethanol, ether, acetone, chloroform and benzene. Slightly smelling of tertiary amine compounds. Shangpu consulting industry analysts pointed out that the packaging, storage and transportation of caprolactam: generally, double-layer packaging bags are used, and the inner bag is polyethylene film bag with heat sealing; The outer bag is kraft paper, polyethylene and other three in one composite bags. It should be stored in a dry and clean warehouse. During transportation, it should be protected from moisture and sunlight, and the packaging bag should be protected from damage

caprolactam is one of the important organic chemical raw materials. Its main purpose is to produce polyamide chips (usually called nylon-6 chips, or nylon-6 chips) through polymerization, which can be further processed into nylon fibers, engineering plastics and plastic films. Ni or sample processing is too short. Long-6 chips have different application fields with different quality and indicators

98% of caprolactam in the world is used for polymerization and production of nylon 6; The second is engineering plastics and film. The United States, Russia, Japan and the Netherlands are the main producers of caprolactam, accounting for two-thirds of the world's total production capacity

major domestic production enterprises include Sinopec Baling Petrochemical Company, Nanjing DSM Oriental Chemical Company, Shijiazhuang chemical fiber company and Juhua Group Company

caprolactam enterprises in China are mainly concentrated in Guangdong, Jiangsu and Zhejiang provinces. As of the end of May 2008, large-scale enterprises in these three regions accounted for more than 50% of all large-scale enterprises

according to the "China caprolactam industry forecast and investment strategy 3. Effect ranking Research Report" released by Shangpu consulting, in China, the vast majority of caprolactam is used to produce nylon 6 fiber, accounting for more than 86% of consumption. Nylon 6 engineering plastics in China are mainly used in transportation, electronic and electrical appliances, textile industry and film, accounting for more than 12% of the total consumption. It is estimated that the demand for caprolactam of nylon 6 engineering plastics in China will increase at an average annual rate of 6.4% in the next few years. By the end of April 4, the total demand for caprolactam in China will be close to 1.6 million tons

note: the reprinted content has made progress in Japan, the United States, etc. the source is indicated. The reprint is for the purpose of transmitting more information, and does not mean to agree with its views or confirm the authenticity of its content

Copyright © 2011 JIN SHI